Elowen - Elven Alchemist

I am just a Hobbyist. I 3D print organic models for fun. Started with an A1 Mini about 3 years ago and just have not looked back. The models that I create are AI Generative assist. I am learning blender but get a functional foundation from AI to then clean up and reshape in Blender. All Models from me are test printed multiple times with different filament. I try not to use the meta or most expensive filament for test prints. All photos from me will be as is, no paint, no primer, just removed supports and took the pics. If there is excessive wispy stringing, I may hit it with a heat gun to clean that up, but everything is photographed as it comes off the printer.

For additional examples of prints I have done (not my models) see Odd_Zone5925 on Reddit. I have printed everything under the sun; from funtional parts in a mechanical setting to DnD minis and dragons, masks, signs, Hueforges, lamps, etc. If there is a way, I print it. I really love the hobby and just want to toss a few things out to the community that I made myself. Cheers to everyone!
 

Elowen - Elven Alchemist

• Elowen is a high detail model. As shown is the .2mm Nozzle version.
•  The .4mm Nozzle is a more efficient, less detailed version. 
• The model, the base, and the table on the base all print as separate pieces. This makes cleanup, prep and paint, and assembly very easy.

• The model can be printed stand alone and attached to any base you want.
• I have included three additional bases correctly scaled to the model.

The .2mm Nozzle has supports that are paper thin and come away with ease. Go slow and be patient, but they should come away with ease.

The .4mm Nozzle supports are a bit thicker by default and will take more care and attention when removing. Use the proper tools; flush cutter, razor, patience.

I welcome feedback and wish you all happy printing on all your projects!

 

Just want to end on one note. The models that you find here are set in very specific print profile settings. These are incredibly clean print profiles designed to do well with the models being shown. You are more than welcome to use these print profiles to print other models.

To use a print profile on another model of your choice:

• Open the 3mf that you want to use.
• add a plate, and open a new model as geometry only on the new plate. It will automatically apply the same settings from the project to that model. 
• Slice the model to ensure there are no conflicts or non-manifold errors.
• Print!
• You can also save these settings in your user presets to use in the future without the hoops.