Expeditions Tracked Vehicle 1/10
Print Profile(7)
Description
A (almost) completely 3D printed tracked vehicle in 1/10 scale
WARNING: Currently still in BETA stage!
- Lighting is still missing
- Fixed remote control (with 2-channel mixer) is unfortunately still missing. However, a test drive has already been completed!
But I don't want to withhold it from anyone ;-)
I am offering a nearly self-designed tracked vehicle for you to 3D print. Caution, it is very large (420mm wide, 620mm long)!
I used the track links and the gearbox from @browser. However, my own reinforced gearbox is under development and will also be offered here soon.
The vehicle is powered by two 540 brushed electric motors (80T), and the gear reduction is implemented using 6mm timing belts. For the suspension, I used four shock absorbers from RC accessories.
I have assigned the print profiles to themes and stored them individually.
Bill of materials :
- 4x Ball bearing 8x16x5 (Idler wheels)
- 2x Nut M8 DIN 6924 (Idler wheels)
- 6x Hexagon socket head cap screw ISO 4762 M5x20 (Idler wheels)
- 6x Hex nut DIN 6924 M5 (Idler wheels)
- 16x Ball bearing 5x16x5 625 (Road wheels)
- 8x Hexagon socket button head screw with flange ISO 7380-2 M4 x 40 (Road wheels)
- 12x Hexagon socket head cap screw ISO 4762 M5 x 20 (Road wheels)
- 4x Hexagon socket head cap screw ISO 4762 M8 x 50 (Road wheels)
- 4x Nut M8 DIN 6924 (Road wheels)
- 8x Hexagon socket head cap screw ISO 4762 M4 x 16 (Road wheels)
- 8x Threaded insert M4 (Road wheels)
- 8x Threaded insert M5 (Road wheels)
- 4x Shock absorbers 85mm (Road wheels)
- 12x Nut M5 DIN 6924 (Road wheels)
- 2x Hexagon socket button head screw with flange ISO 7380-2 M5 x 50 (Upper track roller = Carrier roller)
- 4x Ball bearing 5x16x5 625 (Upper track roller)
- 8x Nut M5 DIN 6924 (Upper track roller)
- 8x Hexagon socket head cap screw ISO 4762 M5 x 20 (Upper track roller)
- 10x Hexagon socket head cap screw ISO 4762 M4 x 60 (Drive sprocket)
- 10x Nut M4 DIN 6924 (Drive sprocket)
- 2x Nut M10 DIN 6924 (Drive sprocket)
- 4x Ball bearing 10x19x5 625 (Drive sprocket)
- 2x Circlips 10mm (Drive sprocket)
- 2x Shaft 10mm ALU or Brass 176mm (Drive sprocket)
- 6x Hexagon socket head cap screw ISO 4762 M4 x 25 (Drive sprocket Gearbox)
- 6x Hexagon socket head cap screw ISO 4762 M4 x 30 (Gearbox)
- 2x Set screw ISO 4029 M5x10 (Drive sprocket)
- 8x Ball bearing 5x11x4 (Gearbox)
- 10x Ball bearing 10x15x4 (Gearbox)
- 6x Belt, Transmission 200-2GT-6 100 Teeth (Gearbox)
- 2x Belt, Transmission 350-2GT (Gearbox)
- 2x Shaft 5mm x60mm Brass (Gearbox)
- 2x Hexagon socket head cap screw ISO 4762 M3 x 16 (Gearbox)
- 2x Hex wheel hub 12mm * 18mm (E-Motor Pinion)
- 24x Hexagon socket countersunk head screw 4*16mm (Bottom shell)
- 24x Hex nut 4mm (Bottom shell)
- 216x Pan head screw M3 x 45mm (Tracks, 2x per track link)
- and various washers where it makes sense
- 6x 5mm LED (2x White, 2x Yellow, 2x Red) (Lighting)
- 4x 10mm LED (Lighting)
- 2x 540 Brushed Motor (Drive)
- 2x Electronic Speed Controller (Drive)
- 2x Battery (Drive)
- 1x Receiver (Drive)
- 1x Transmitter (CAUTION! Must be able to cross-mix 2 channels!) (Drive)
(no guarantee of completeness)
YouTube: https://www.youtube.com/watch?v=VRrMu5q9drg
Documentation (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)