Parametric Belt Pulley Generator (GT2, HTD, T5)

📦 **Ultimate Parametric Belt Pulley Engine (Bilingual Customizer)** 📦
The perfect counterpart! Easily generate high-precision matching timing pulleys for your 3D printers, robotics, and custom actuators.

🔗 **Looking for the matching custom belt?** Get the Parametric Belt Generator here: [HIER LINK ZU DEINEM RIEMEN-GENERATOR EINFÜGEN]

💡 **Key Features / 特点:**
• **True Circular Curves:** Uses authentic mathematical arc profiles for HTD and GT2. No skipping, perfect tooth engagement.
• **Supported Standard Profiles:** GT2 (2mm, 3mm, 5mm), HTD (3mm, 5mm), XL, L, MXL, T2.5, T5, T10.
• **Shaft Lock Mechanisms:** Choose between a standard round bore, integrated D-Cut flat shaft, or M3 Set Screw pocket with a built-in vertical hexagon nut slot!
• **Fully Parametric:** Easily customize tooth count, gear width, flange height, and motor shaft diameter.

🛠️ **Printing Tips / 打印建议:**
• **Material:** Print with rigid filaments like **PETG, ABS, ASA, or Nylon (PA)**. (Do NOT use TPU for the pulley).
• **Perimeters:** Use 4-5 walls/perimeters to ensure the teeth and shaft area are rock solid.
• **Infill:** 40% to 100% (Gyroid recommended).
• **Orientation:** Print flat on the build plate (flange facing down). No supports needed!

---

🇨🇳 **全能参数化同步轮生成器（双语参数化）**
完美的配套工具！轻松为您的高精度 3D 打印机、机器人或自定义执行机构生成匹配的同步带轮。

🔗 **正在寻找匹配的自定义皮带？** 在此处获取参数化皮带生成器：[HIER LINK ZU DEINEM RIEMEN-GENERATOR EINFÜGEN]

💡 **核心功能:**
• **真实圆弧齿形:** 为 HTD 和 GT2 采用真正的数学圆弧轮廓，绝不跳齿，完美咬合。
• **支持的工业标准:** 支持 GT2, HTD, XL, L, MXL, T2.5, T5, T10。
• **轴固定结构:** 可选择纯圆孔轴、D型轴切面，或带有内置垂直六角螺母槽的 M3 顶丝固定孔！
• **完全参数化:** 轻松自定义齿数、齿面宽度、防脱挡边高度以及电机轴直径。