Ctime4

cover

Screenshot 2026-06-24 at 11.11.52 AM.png

Screenshot 2026-06-24 at 11.12.33 AM.png

plate_1.png

6b42cc21971b56b5.jpeg

IMG_5633.jpeg

IMG_5632.jpeg

<ul><li>Layer Height: 0.20 mm</li><li>Nozzle Diameter: 0.40 mm</li><li>Infill: 30–40% Gyroid or Grid</li><li>Material: PETG recommended for outdoor use (ASA or ABS for maximum weather resistance)</li><li>Print Orientation: Print vertical on one of the side edges, with brim for added stability </li><li>Brim: 5 lines recommended for PETG, ASA, or ABS</li><li>Outdoor Use: PETG, ASA, or ABS recommended. PLA is not recommended due to potential heat deformation and UV exposure.</li><li>Installation: Clips beneath the upper vinyl siding reveal, with the lower reveal helping keep the mount flush against the siding for a secure, stable fit.</li></ul>

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Designed for the Spotlight Ring Cam Plus, this no-drill mount clips under the upper vinyl siding reveal. The lower reveal acts as a stabilizing contact point, keeping the mount flush against the siding and minimizing movement. Installation requires no screws or holes, helping preserve the integrity and appearance of the vinyl siding.  One should use a UV protected material to prevent degradation of full time sun exposure depending on location. This is designed for a ~5.25&#34; vinyl reveal.

Vinyl-Siding-Mount-Spotlight-Ring-Cam-Plus

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models