Helix Vase: Twisted Fluted Vase
Print Profile(1)
Description
A twisting, fluted vase with a full bulbous belly, a long tapering neck, and a softly flared rim. The ribs spiral about a third-turn from base to mouth, so the surface catches light differently as you move around it. Designed to print in Spiral / Vase mode as a single continuous wall — no supports, no infill, fast and clean.
Boost Me (for free)
Free for you, big help for me: if this vase printed well, drop it a boost. More fluted designs are coming, and your boost decides what's next. Thank you for printing!
Specs
- Size: ~124 mm wide × 200 mm tall (scales nicely from 60% to 150%)
- Single watertight-ish single-wall body — see note below
- Original parametric design
Recommended print settings
- Spiral vase mode: ON (Bambu Studio → Quality → Special mode → Spiral vase)
- Nozzle 0.4 mm, layer height 0.20–0.28 mm
- Wall line width 0.8–1.2 mm (wider = sturdier single wall)
- Bottom layers: 3–5 · Infill: 0% · Supports: none
- PLA works great; silk PLA or PETG give a nicer sheen on the flutes
- Moderate speed for the crispest ribs
Tip: As a single-wall vase-mode print it isn't reliably watertight. For fresh flowers, drop a glass test tube or a slim jar inside as a liner; otherwise it's perfect for dried stems.
If you print one, post a Make — I'd love to see your color/material choices.
License
Comment & Rating (0)