Window Panel for 1/10 Toyota Comp Crawler Body
Print Profile(1)
Description
I made this single piece window panel for the 1/10 Toyota comp crawler body by jasonboz56 to make my truck look a bit more complete until I make or find an interior.
The print profile includes two plates: one thinner window (that is trickier to print, but lighter) and one thicker window (that is easier to print, but heavier).
The thinner option was bit tricky to print so you may need to play with print speeds, temperature, etc. Be sure to use archane walls or you will get artifacts (in the windshield mostly), due to the thinness of the model. Add manual supports to the cowl lip.
With either option, paint the outer seams to a back corner so that they are hidden behind the c-pillar, otherwise the slicer will put them on the edges of the middle section of the rear window and it won't look right.
Attach to the body with some E6000 glue on the inside of the roof and under the cowl (and anywhere else needed to make the windows conform to the body.
Be sure to check out my other add-ons for this body:
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (6)