Print Profile(1)
Bill of Materials
Description
Lamp Socket Adapter Ring — Ø 28.95mm / Ø 63.7mm
Adapter/centering ring allowing a standard socket to be fixed in an oversized hole, typically on a wooden lamp base or other support.
This part fills the space between the outer diameter of the socket and the support hole, while keeping the assembly well centered and stable.
Dimensions:
- Inner diameter (socket passage): 28.95 mm
- Outer diameter (ring body): 63.7 mm
- Skirt diameter (retaining flange): 69 mm
Usage:
Ideal if you have a standard socket to attach to a support where the hole is larger than expected. Double-check your dimensions before printing, as some sockets may vary slightly depending on the manufacturer.
Printing tips:
- Recommended layer height: 0.2mm
- Material used, e.g.: PLA/PETG
- Infill percentage: 15%
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)