Cricket Ball Twist Fidget

BRAND NEW TWIST FIDGET - THE CRICKET BALL TWIST FIDGET AS REQUESTED

Extremely simple and satisfying twist fidget that's easy to print with little waste

Fully print in place with zero brim or support required

0% Infill required

Can be scaled in size (minimum of approximately 80% with Arachne walls enabled)

For anyone who wishes for a quicker print I recommend scaling in size slightly, the time is also significantly reduced using a dual head printer such as the H2D

Print and go, simply choose your color and print/ play

Can be scaled up in size as large as you want!

Troubleshooting - 

Please ensure filament is calibrated before printing

Anyone who experiences the pieces falling apart it is likely due to slight under extrusion - this can be fixed by calibrating filament and enabling Arachne wall generator