Candle Wick Centering Tool for 10oz Tumbler Jars
Print Profile(1)
Description
A wick centering tool that actually holds the wick. It sits on the jar mouth and
the wick clips into a sized slot, so it stays centered and upright when you pour
hot wax and the cotton goes limp. Five slot sizes cover the common cotton wicks.
What's in the file:
* 5 STL files, one per slot size: 1.5, 1.75, 2.0, 2.5, 2.75 mm
* Matching Bambu .3mf for each size
* Each tool has a center position plus two outer positions for double-wick candles
Print settings (recommended):
* Material: PETG (a little flex helps the clip and handles pour warmth) or PLA
* Layer height: 0.2 to 0.24 mm
* Walls: 2; top 4 layers, bottom 3 layers
* Infill: 15 percent gyroid
* Supports: none
* Brim: none, the base is flat
Fits / compatible with:
* Tumbler jars with a ~73 mm (about 2.87 in) inner mouth (standard 10 oz tumbler)
* Cotton wicks in the common CD and LX range; pick the slot that grips your wick
* Single-wick or double-wick candles
Notes:
* Need a different jar size or slot size? Comment and I can post a variant.
* The size is engraved on each tool.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)