Coffee Pod Dispenser Rack

Coffee Pod Dispenser Rack

If you have a capsule coffee machine and need to access them more easily, this model is for you. Its practical shape allows you to take the capsules without problem and without fear of them falling to the floor.

Features:

✅  Design.- It is designed to use the capsule box directly as a dispenser, avoiding direct contact with the print. Also one capsule dispenser can be stacked on top of another.

✅  Box size.- It is compatible with most boxes on the market, the most standard being 122x122mm. 

✅  Hygiene.- By not having direct contact between the capsules and the plastic, there is no risk of microplastics or bacterial proliferation. 

✅  Resistance.- The model does not really have to bear much weight, and its main function is to keep the box open, so PLA can be used.

✅  Efficient design.- In the development of the model, a low profile has been maintained for the model, ensuring it is stable and functional. Low filament consumption and print time have been maintained, making it easy to print.

Printing Features:

Recommended Filament: PLA or PETG.

Tolerance: 0.2mm

Walls 3 infill 10%.

Supports: Yes (Tree - On the print bed).

Assembly

1) First, open the box, avoiding damaging it as much as possible.  

2) Place the box horizontally and insert the box lid into the model, so that the edge of the box rests on the strip that will keep it open.

4) finally. Flip the box along with the dispenser onto its back side to prevent the capsules from falling.