Auto-Load Pet Treat Blaster for Dogs & Cats

Turn treat time into an exciting game of fetch!

The Auto-Load Pet Treat Blaster is an innovative, 3D printable interactive pet feeder.

Designed to make training and feeding engaging, this mechanical launcher auto-loads the firing chamber via a gravity-fed top hopper. Simply pull the rear slider, press the trigger, and watch your dog or cat chase their favorite snack!

🎥 Assembly & Demo Video

🌟 Key Features

• Mechanical Auto-Load System: Smooth, gravity-based feeding mechanism from the hopper directly into the chamber.
• Fully Scalable: Need a smaller version? Scale the project down to to perfectly accommodate small kibble or cat treats.
• Simple Hardware: No complex parts required. Operates using standard rubber bands.
• Hardware Required: 2x Standard 1.4mm x 20mm rubber bands or similar.
• Power Tuning:
  • Standard Mode: Use a single loop of the elastic for gentle, short-range indoor play.
  • Power Mode: Double-loop the elastics to increase tension and distance for outdoor play.
• Assembly Tip: For maximum durability during intensive use, apply a small amount of adhesive to secure the top hopper to the main body channel. Ensure all support material is cleared from the internal tracks for smooth operation.
•  

🍏 Food Safety & Material Choice

Your pet’s health comes first. We recommend printing the hopper, hopper lid, and internal slider chamber using Bambu PLA Pure filament. This material is specially formulated for safe contact with food, ensuring worry-free playtime.