Print Profile(3)
Description
Boost Me (for free)
❤️ One click. Real support. Thank you. ❤️ ⚙️ Helps build the next Component tool.
A simple plant watering spike designed to guide water deeper into the soil and distribute it through side holes.
Use it for pots, planters, garden beds, tomatoes, herbs and houseplants when you want water to reach below the surface instead of staying only on top.
⚙️ Key Features
💧 Guides water deeper into the soil
🌱 4 flow variants for different watering needs
🪴 Designed for pots, planters and garden plants
🎯 Direct Flow version for directional watering
🧩 One-piece print, no assembly required
🖨️ A1 mini 3MF print profiles included
🛠️ Clean, functional garden tool design
📦 Included
- Fine Flow STL and 3MF
- Medium Flow STL and 3MF
- Fast Flow STL and 3MF
- Direct Flow STL and 3MF
- Set of all 4 variants
- A1 mini full set print profile
- A1 mini individual plates print profile
🌊 Flow Variants
- Fine Flow: smaller hole pattern for slower water release
- Medium Flow: balanced version for everyday use
- Fast Flow: larger holes for faster water distribution
- Direct Flow: larger holes on one side for directional watering toward the root area
🎯 Direct Flow Note
The Direct Flow variant has larger holes on one side only. The small cut-out on the top rim indicates the watering direction.
Rotate the spike so the cut-out points toward the root area or the part of the soil you want to water.
🧰 Best For
- potted plants
- houseplants
- garden beds
- tomatoes and herbs
- larger planters
- root-area watering
🖨️ Print Notes
- Layer height: 0.20 mm
- Walls: 3
- Infill: 15-25%
- PLA for indoor use
- PETG recommended for outdoor use or longer contact with moisture
- Print profiles prepared for Bambu Lab A1 mini
💧 How to Use
- Insert the spike into the soil near the plant.
- Pour water into the top funnel.
- Let the water flow down through the side holes.
- Choose the flow version depending on soil type, pot size and watering needs.
⚠️ Notes
Water flow depends on soil density, hole pattern, print quality and material. For outdoor use or long-term contact with moisture, PETG is recommended.
Boost Me (for free)
❤️ One click. Real support. Thank you. ❤️ ⚙️ Helps build the next Component tool.
🔗 More from Component
Self Watering Plant Ring - 7+ Day Water Reservoir
Clothespin Clip Clamp - Laundry Peg
Utility Carabiner Clip - EDC Accessory
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (108)