aechtersteirer

cover

WhatsApp Image 2026-06-21 at 12.09.222.jpeg

WhatsApp Image 2026-06-21 at 12.09.223.jpeg

WhatsApp Image 2026-06-21 at 12.09.221.jpeg

WhatsApp Image 2026-06-21 at 12.17.534.jpeg

plate_1.png

dbca26da205efa8c.jpeg

WhatsApp Image 2026-06-21 at 13.50.55.jpeg

WhatsApp Image 2026-06-21 at 13.50.5005.jpeg

ASA-CF, 0.16mm layer, 3 walls, 25% infill

WhatsApp Image 2026-06-21 at 12.09.22.jpeg

PLA, 0.16mm layer, 3 walls, 25% infill

<h2> Deutsch:</h2> Beschreibung: Ich habe diesen kompakten Adapter/Halter für den Gepäckträger entworfen, damit ich mein Rücklicht nach der Montage des Gepäckträgers weiterhin optimal nutzen kann.&nbsp;Das Problem: Nachdem ich an meinem Cube E-Bike den Topeak TetraRack M2 Gepäckträger inklusive der Topeak MTX TrunkBag DX 2.0 Tasche montiert hatte, wurde mein bisheriges Rücklicht an der Sattelstütze komplett verdeckt. Da der Gepäckträger selbst keine passende Aufnahme für Rücklichter hat, musste eine Lösung her.&nbsp;Kompatibilität: Dieser Adapter wurde speziell für das Supernova TL3 Pro Rücklicht optimiert, kann aber auch mit anderen Modellen passen (Aufnahmedurchmesser: ~17,50 mm).&nbsp;Material-Empfehlung:<ul><li>Ich habe mein Modell wegen der besseren UV-Beständigkeit aus ASA-CF gedruckt (da ich gerade kein normales ASA da hatte).</li><li>Ein Druck aus normalem PLA sollte für diesen Zweck aber ebenfalls völlig ausreichen.</li></ul>Montagehinweise:<ul><li>Es müssen zwei Löcher mit einem 5 mm Bohrer gebohrt werden. Am besten nutzt du den Adapter selbst direkt als Bohrschablone.</li><li>Für die Befestigung werden zusätzlich zwei M5x35 mm Innensechskantschrauben (Inbus) benötigt.</li></ul><h2>English:</h2>Description: This is a compact adapter/mount designed to relocate your rear light after installing a luggage carrier, ensuring it remains fully visible and functional.&nbsp;The Problem: After mounting the Topeak TetraRack M2 carrier and the Topeak MTX TrunkBag DX 2.0 on my Cube e-bike, the original rear light on the seatpost was completely hidden. Since the carrier itself doesn&#39;t feature a built-in light mount, I designed this solution.&nbsp;Compatibility: This adapter is a perfect fit for the Supernova TL3 Pro rear light, but it may also work with other models that have a similar mounting diameter (~17.50 mm)&nbsp;Material Recommendations:<ul><li>I printed my version using ASA-CF for its excellent UV resistance (mostly because I didn&#39;t have standard ASA on hand).</li><li>However, printing this model in standard PLA should also work completely fine.</li></ul>&nbsp;Installation Instructions:<ul><li>You will need to drill two holes using a 5 mm drill bit. Tip: Use the 3D-printed adapter itself as a drilling template!</li><li>For assembly, two M5x35 mm Allen screws (hex bolts) are required.</li></ul>

<h2> German:</h2> Description: This compact adapter/holder was designed for the luggage rack, allowing optimal use of a rear light even after the rack has been mounted.&nbsp;The Problem: After I mounted the Topeak TetraRack M2 luggage carrier, including the Topeak MTX TrunkBag DX 2.0 bag, on my Cube e-bike, my previous rear light on the seatpost became completely obscured. Since the luggage carrier itself lacks a suitable mount for rear lights, a solution was needed.&nbsp;Compatibility: This adapter is specifically optimized for the Supernova TL3 Pro rear light, but it may also fit other models with a similar mounting diameter (~17.50 mm).&nbsp;Material Recommendations:<ul><li>I printed my version using ASA-CF for its improved UV resistance (mostly because I didn't have standard ASA on hand).</li><li>However, printing this model in standard PLA should also work completely fine for this purpose.</li></ul>Installation Instructions:<ul><li>You will need to drill two holes using a 5 mm drill bit. Tip: Use the adapter itself as a drilling template!</li><li>For assembly, two M5x35 mm Allen screws (hex bolts) are also required.</li></ul><h2>English:</h2>Description: This is a compact adapter/mount designed to relocate your rear light after installing a luggage carrier, ensuring it remains fully visible and functional.&nbsp;The Problem: After mounting the Topeak TetraRack M2 carrier and the Topeak MTX TrunkBag DX 2.0 on my Cube e-bike, the original rear light on the seatpost was completely hidden. Since the carrier itself doesn&#39;t feature a built-in light mount, I designed this solution.&nbsp;Compatibility: This adapter is a perfect fit for the Supernova TL3 Pro rear light, but it may also work with other models that have a similar mounting diameter (~17.50 mm)&nbsp;Material Recommendations:<ul><li>I printed my version using ASA-CF for its excellent UV resistance (mostly because I didn&#39;t have standard ASA on hand).</li><li>However, printing this model in standard PLA should also work completely fine.</li></ul>&nbsp;Installation Instructions:<ul><li>You will need to drill two holes using a 5 mm drill bit. Tip: Use the 3D-printed adapter itself as a drilling template!</li><li>For assembly, two M5x35 mm Allen screws (hex bolts) are required.</li></ul>

Holder - Adapter for Supernova TL3 Pro

ASIA

Print Profile(2)

Description

German:

English:

Comment & Rating (0)

License

Related Models