VR 46 Monster Display Box
Print Profile(2)
Bill of Materials
- Steel/Aluminium Rods x 2: ø6mm x 250mm
Description
Boost Me (for free)
Boosting this design is free for you, yet it makes a huge difference for me. Thanks for helping me keep creating!
Membership
Commercial License
If you find my designs interesting and useful, and would like to see more in the future, please consider giving me a boost and becoming a supporting member.
Also, if you need parts for any of my designs, please use the BOM link provided on the model page when buying. This gives me a small commission.
VR 46 Monster Folding Door Box
This is the VR46 version of the Monster Folding Door Display Box, designed to showcase the clean and minimal look of Valentino Rossi's Monster Energy Can.
The box features the same segmented folding door mechanism as my other designs, opening smoothly from the center and folding outward to reveal the can inside. The structure is rigid and balanced, with simple mechanical hinge points for reliable movement and easy assembly.
It is sized specifically for Monster cans and works equally well as a display piece, gift box, or shelf showcase.
Like the other boxes in this series, the lid can be swapped for an alternative version with an LED slot if you want to add internal lighting.
Want it to look just like my printed model? Use these filaments.
- Bambu Jade white PLA Basic
- Bambu Black PLA Basic
- Bambu Mandarin orange PLA Basic
- Bambu Blue PLA Basic
- Bambu Red PLA Basic
- Bambu Yellow PLA Basic
- Bambu Silver PLA Silk+
3D printed parts :
- Top pins x 2
- Base x 1
- Top x 1
- Back pcs x 13
- Door parts x 26
- (Alternative tops for LED)
Other parts required :
- 2 pcs Steel/alu rods ø6mm x 250mm long. !!Link bellow!!
- 26 pcs Round Magnets 8x2mm
- Ca glue.
Optional : Led Lamp Kit 001 or KC007
You can find the steel rods you need here → (affiliate link)
If Bambu i out of stock, buy LED here → (affiliate link)
8X2mm Magnets → (affiliate link)
⚠️ IMPORTANT QUALITY NOTE: This model was engineered specifically for steel or aluminium rods to ensure structural stability and smooth mechanical movement. Using 3D-printed plastic rods will cause the mechanism to flex, feel unstable, and likely snap over time, ruining the premium feel of the box. Use third-party plastic rod profiles at your own risk!
One's you have printed all the parts and acquired the accessories you need, just follow the assembly guide down below.
Each individual part is marked with a number, making it very easy to assemble.
When you're done, it should look something like this…
Follow me if you want to see more of my designs in the future!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)