Terrarium Aquarium Tree Root Cave Cavern

This highly detailed, intricate centerpiece is designed to simulate a complex system of twisted tree roots and a hollow stump. It creates a realistic and functional natural focal point for your terrarium, paludarium, or aquarium, offering multiple hiding spots and tunnels for small reptiles, amphibians, invertebrates, and fish. The organic, weathered-wood texture provides a beautiful natural aesthetic.

Dimensions:

• Height: 10 cm
• Diameter (widest point): Approximately 16 cm

Printing Settings:

• Material: PLA or PETG
• Layer height: 0.16mm
• Support: YES, support material is required.
• Infill: The provided example is printed at 5% infill, which provides a good balance of strength and light weight for non-aquatic uses (like a dry terrarium).

Note for Aquarium Use:

If you intend to use this model in an aquarium, please be aware that the 5% infill makes it very buoyant, and it WILL float. You must address this to keep it submerged.

There are two recommended methods:

1. Print with a high infill
2. Glue a base (recommended): Glue a heavy or flat object to the underside of the printed model using aquarium-safe silicone or superglue. This creates a stable anchor.

Finishing Tips:

• You can sand the layer lines and use a pet-safe primer.
• Painting with animal-safe paints can enhance the realistic wood details.

Check out my profile on Patreon: https://patreon.com/CrizzyDesigns

Don´t forget to check out my collections: https://makerworld.com/en/@CrizzyDesigns/collections