Baroque Vampire Skull Masquerade Mask

For any commercial license or support, my Patreon is available here : Patreon or Makerworld membership

THE MODEL :

Embody the dark elegance and timeless allure of the lords of the night with this breathtaking Baroque vampire skull masquerade mask. This unique three-dimensional design flawlessly fuses a haunting macabre silhouette with the lavish pageantry of elite historic court balls. The skull features stylized, aggressive anatomical contours highlighted by prominent, razor-sharp vampire fangs and an intricate lattice of high-relief Rococo scrollwork weaving across the forehead and eye sockets. It is the ultimate statement prop for high-end Gothic fantasy cosplay, a mysterious Halloween ensemble, or to display proudly upon a vanity stand as a captivating piece of dark memento mori art.

Tested Print Settings (Recommendations): The sharp definition of the fangs and the complex lines of the skeletal carvings were successfully verified using matte black PLA, as displayed in the file Gemini_Generated_Image_ah5hk6ah5hk6ah5h.png.

• Infill: Set at 5% for the stationary display setup. Slicing Pro-Tip for Wearability: If you plan to run ribbons or elastic bands through the temporal slots for active use, we highly suggest boosting the infill rate to 15% and running 4 wall loops (perimeters) to reinforce the frame edges against strap tension.
• Nozzle: 0.4 mm
• Supports: Well-placed tree supports are highly required beneath the overhanging upper jaw, under the fangs, and along the upper rim of the hollow eye arches for a clean surface finish.

Sizing Information: The model is scaled to standard adult facial dimensions. Please feel free to freely resize the model inside your slicing software to achieve a custom-tailored fit for your specific face width or to downscale it into a detailed miniature display relic.

INFORMATION:

A common question is: why do these prints require supports when they could be printed lying flat?

For my designs, I deliberately choose to print them standing upright rather than flat, in order to achieve the best possible level of detail. I prioritize visual quality over saving a few grams of filament.

Of course, you are free to change the print orientation in your slicer if you prefer.

FILES :

All models are available for download in 3MF format. We recommend using Bambu Studio (Bambu Lab's slicer), as some specific modifications may only be visible within this software.