PR24 Police Side Handle Baton Tonfa
Print Profile(3)
Description
My own model of a PR24 side handle police baton also known as a Tonfa. I use this as a training tool, but could also be used for cosplay. The current infill setting is good for training, if you want to make it stronger I'd increase the wall count to 8 and the infill to 80-90% but at that point it would start to actually be fairly painful for training purposes. Around 20% or less is good for training, wouldn't go under 10% infill and 4 walls for any purpose though.
The original model is for an H2C as it's a full sized PR24, almost the same specs as the real world one. I plan to make smaller ones for other printers but at that point it would be more for cosplay.
UPDATE: I've added a second print profile for non H series sized printers, it's about ⅔ the size so you're only losing between 30-40% but it's the maximum build volume for standard size printers like the P1/P2/A1/X series.
Boost Me (for free)
If you found this helpful I would appreciate a free boost so I could continue buying equipment to test more models out.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)