NSG3Dprinting

cover

Murica

plate_1.png

Murica Alt

plate_2.png

20260619_090520.jpg

Bald Eagle - Hype Chain - 4-color version

851c67df2178b023.jpg

Bald Eagle Hype Chains - 5-Color - Multi AMS

20260619_090503.jpg

When the machine Prompts &#34;Paused by user&#34; swap out the black filament for yellow/Gold or whatever color you want to use for the beak….

Single AMS -5- Color_ Read Description

Screenshot 2026-07-01 194513.jpg

851c67df2178b023.webp

Sometimes adhesion issues can mess the chain up, don&#39;t let that ruin your entire print!&nbsp;This is the chain only and has a pause at 8mm, to allow insertion of the Eagle Amulet. &nbsp;If you are in fact having issues with adhesion I will list common issue and resolutions below.&nbsp;<ul><li>Ensure build plate has been cleaned well with Dawn dish soap, and 90% or higher IPA</li><li>Avoid toucing build plate with your hands in the print areas, as the oils will cause adhesion issues. </li><li>Filament could be shrinking excessively if it has absorbed a lot of moisture, less likely, but worth mentioning</li><li>If you are using the P1S, print a vent deflector, the air blowing directly on the print in very close range will cause it to peel off in the initial layers.</li><li>If you print with PETG often, consider using an adhesion promoter like glue stick. PETG and PLA will not stick to each other, and seems near impossible to get all PETG residue off with just a wash of the plate. Alternatively flip the plate if it has not been used for PETG.</li><li>Increase the bed temp to help adhesion by 5 to 10 degrees. </li><li>Try different print settings, you may play with wall counts, infill percentage, etc… </li><li>If all else fails try a different brand if available, or try the alternate chain color for a different first layer color.</li></ul>

Chain Only - With Pause

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>My first dabble into the hype chain/ rally chain world. Let me know if I should make more by sharing a boost! </boostcontent></boostme>Decided I wanted to make something for America&#39;s upcoming 250th celebration of freedom! Let me know what you think in the comments, or by liking rating, and following me. The support goes a long way, and gives me motivation to keep making some new stuff to share!

American Bald Eagle Hype Chain

ASIA

Print Profile(4)

Description

Comment & Rating (19)

License

Related Models