Camera angle templates for FPV 25-55deg

Stop guessing your camera tilt! This is a complete set of FPV Camera Angle Gauges / Templates designed to help you set your camera angle perfectly and consistently on the bench.

⚠️ Note: These are tuning tools to align your camera before tightening the screws—they are not meant to be mounted on the drone during flight.

### Key Features

• Thickness: 3.0mm – sturdy enough to sit flat against the frame.
• Easy Identification: Every gauge has its exact degree embossed on it, making it quick to grab the right one.
• Includes increments as tight as 2.5° for absolute precision.

What's Included in the Files?

I have organized the files to give you maximum flexibility depending on what you need to print:

1. The Ultimate Pack: A single file containing all plates in 2.5° increments (from 25° to 55°) for ultimate precision.
2. 5° Increments Pack: A curated set of plates changing by 5 degrees.
3. 10° Increments Pack: A quick-selection set changing by 10 degrees.
4. Individual Files: Every single angle available as a separate file, so you can just reprint a specific one if you lose it.

Print Settings Recommendations

• Material: PLA.
• Infill: 15% - 20% is more than enough since these don't take flight impacts.