Sim Racing Keyboard & Mouse Tray GT Omega Pro

Hello Everyone.

I have designed this keyboard and mouse tray for my GT Omega Pro wheelstand, which is sized around my Aula F75 keyboard. It fits the highlights holes in the mounting pattern picture.

Keyboard Spacing

I have included other spaces for the holding pieces to be slotted into so it can fit other sized keyboards. 

The spacings accomodate for 310, 330 & 350mm keyboards. These pieces can be remove for larger keybaords but it wont hold them as securely and may eat into your mouse space.

Rim Suitability

I have used this for a few months before uploading and it works great. Ive been using my 300mm gt and round style rims and it is far enough away so that you dont collidew with the keyboard. Larger wheels may have issues here.

Print Settings

Mine is printed in Bambu Lab PLA matte black & red using defualt preset only with supports enabled and a 5mm outer brim.

Materials required:

4 x M6 bolts

4 x M6 nuts

These are the parts that I used, but any nuts & bolts that fits the mounting holes should do. You're a sim racer, you'll have loads lying around somewhere :)

Assembly

The 3 parts of the tray friction-fit togteherr using dowels. The holding pieces for your keyboard and mouse also just snap into place and are removeable. The tray sits ontop of the brackets and is held in place with hooks. The brackets are bolted onto your wheeldeck with nuts and bolts.

This is my first uploaded design so if you have any questions or request, just give me a shout :)