BcS Umbra SBCAR
Print Profile(1)
Bill of Materials
Description
Collet free modified version of Umoya SuperBCAR from WaFfLe and ZaC
I tried my hand at polishing up a few corners here and there, and tried to match the aesthetics of Rexfires Axiom.
This is strictly only friction mounted, so you will need:
Note this is a tight fit with a 16mm Barrel, but it is supposed to be :)
- 18 x F683ZZ Bearings
- 2x - 016 O-Rings
- 18 x M3-8mm or M3-10mm Flat Socket Cap Screws (Ultra Thin Super Flat Screws work great as well)
- (Alt standard socket cap screws with M3x8 or M3x10 will work if you don't have flat heads.)
I recommend printing with a brim, and tree/organic supports, with top or bottom orientation, base on the bottom seems to work the best from my test prints.
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)