Phoenix Earring Charm — firebird pair

A majestic perched phoenix charm for earrings or pendants, about 32 mm tall, with a jump-ring bail baked into the nape so it hangs upright. Ships as a mirrored left/right pair so both birds face outward. Styled after a Fawkes-like firebird — a swept-back crest, swan-curved neck, folded wings and a long fanned tail that becomes the dangle.

A majestic phoenix perched in side profile, sized as a charm for earrings

or necklaces. Styled after a Fawkes-like firebird — sold through plumage, not

flames: a swept-back crest of pointed plumes, a swan-curved neck, folded wings,

and a long fanned tail that sweeps down to become the dangle of the earring.

• About 21 x 17 x 32 mm
• - A jump-ring bail (2.5 mm inner) is baked into the nape behind the crest,
•   with the hole running side to side, set above the centre of mass so the
•   bird hangs upright and facing forward
• - Ships as a mirrored left/right pair (`phoenix_earring.stl` +
•   `phoenix_earring_mirror.stl`) so both birds face outward when worn
• - Add a 6 mm jump ring plus a fish-hook ear wire for an earring, or a
•   lobster clasp on a short chain for a pendant

Print:

• Light supports recommended (tree). The long tail-fan underside and the
•   lower wing have organic overhangs; the crest tips point up (no support).
• - A brim helps the small footprint stick to the bed.
• - 0.12 to 0.16 mm layers for crisp feather detail — print one and check the
•   thin crest/tail edges for fragility before committing to the pair.
• - Prints perched on its rock base, as exported.

Single colour as shipped. A dark or metallic silk PLA especially flatters the

plumage; paint the eye for a finishing touch.

Print settings

• Printer: Bambu Lab (any FDM)
• - Material: PLA or PETG
• - Layer height: 0.12-0.16 mm
• - Walls: 3
• - Infill: 15%
• - Supports: light tree (tail underside + lower wing)
• - Orientation: perched on rock base, as exported

License: CC-BY-4.0