Cubes of Destiny-0.2MM FDM Miniature Profile
Print Profile(1)
Description
This is a printing profile for a 0.2mm nozzle to print miniatures. 0.5 Layer height also works fantastic, and I even use 0.1 with adaptive layers to 0.4 on big prints. Most of these will also work for 0.4mm nozzle
- You need to run the proper calibrations for your filament to get the correct flow ratio and K-factor.
- Additional settings for cooling tab that you can find when you edit filament. VERY important.
- Dry your filament to get good results.
- This is for Bambu Lab PLA Basic, but I've also tested it with their PLA Matte.
- Tamiya Extra Thin Cement QUICK SETTING, normal Extra Thin DOES NOT WORK.
- It will only work ONCE to smooth surface or melt the two parts together, once it evaporates applying more will not work. Follow proper safety guidelines.
- Calibrate your elephant foot to get the best results when splinting the mini in half.
Big thanks to everyone online who is constantly contributing information and testing out different ideas for printing settings. The Precision settings were a big boost to quality that I stumbled upon in a random Bambu forum discussion.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)