Dust extraction adapter Metabo DH330 -> Ø 35.5mm
Print Profile(1)
Description
It is not always necessary to use a large dust extraction system on a thickness planer. Often, only a small amount of chips accumulates due to small workpieces, making a large system superfluous.
Unfortunately, a standard vacuum cleaner cannot be connected directly to the Metabo DH 330!
For work where only a few wood chips accumulate, for example with narrow boards - for this case, I have designed an extraction adapter that now makes it possible to operate a conventional vacuum cleaner on the Metabo DH 330 thickness planer.
Since most suction tubes are conical, it should be possible to operate various workshop vacuums with this. To ensure your vacuum cleaner fits, please refer to the bore dimensions below.
Dimensions :
Total length : approx 60mm
Vacuum cleaner connection : Ø 35.5mm
Chamfered inside
Boost Me (for free)
Do you like it?! Thanks for your boost!
IMPORTANT!!!
When planing wider boards, I recommend using a large dust extraction system, as small extractors tend to clog with increased chip volume. Please judge for yourself whether an extractor with a smaller diameter is advisable in your case, or if it is prudent to use a large dust extraction system instead!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)