Bulbasaur Seated Figure

Welcome the most beloved grass-type starter to your collection! This model is a single-piece, single-color adaptation of the charismatic sitting Bulbasaur figure, ideal for those looking for a clean, fast print without the hassle of filament changes.

As you can see in the sample images, it looks spectacular printed entirely in green filament, perfectly capturing all the textured details of its skin, spots, and iconic back bulb directly from the print bed.

🚀 Design Features

Single-color print: Optimized to look great with any filament (especially green PLA!). You don't need an AMS to get a detailed result.

Integrated base: Includes a stylized circular support with Pokéball detail on the front to keep the figure stable.

Defined details: Eyes, spots, and folds are modeled with relief to stand out perfectly even using a single material.

🖨️ Recommended Print Settings (Tested on Bambu Lab)

Filament: Green PLA (or the color of your choice).

Layer height: 0.16mm or 0.20mm (0.12mm if you want maximum smoothness on the head's curves).

Infill: 10% - 15% (with Gyroid pattern to save material and maintain strength).

Supports: Highly recommended to activate automatic Tree Supports oriented to the build plate for the overhangs of the bulb and chin.

Brim: Usually not necessary thanks to the wide surface area of the base, but activate it if you have adhesion problems.

💬 Additional Notes

If you liked the print result, don't hesitate to upload a photo of your finished piece in the comments section and leave a 5-star rating ⭐! It helps me a lot to keep sharing more designs with the community.