Toro Titan Zero Turn Mower

Toro Titan ZT Mower NO AMS on 2 plates. It has the deck lift pedal. The wheels roll freely and the swivel pivots for zero turning, The steering handles also move. no glue needed all push pin assembly. The Mower measures about 5.5 inches long x 4 inches wide x 3.5 inches tall. I used all PLA and printed on a P1S with support on. I hand painted the raised lettering, but I am not good at it. a little to shaky. 😒

 Assembly, how I do it 

1. Remove all support first, clean out any holes. 
2. Do any painting 
3. Push the pins into rear wheels on the hubs, put hubs on to frame
4. Assemble the wheels and pins in the front yokes and attach the yokes to frame  
5. Place the control box on the right fender. place the gas cap on the left fender and assemble both fenders onto the seat base, be sure you cleaned out these holes.
6. Assemble the steering onto the seat base, Then the seat to the seat base. Don't put it on the frame yet. 
7. Place the deck lift pedal into the frame hole 
8. Attach the engine, then the seat assembly, Then the mowing deck
 Have Fun