Thirsty Dragon

cover

Science.jpeg

Energy.jpeg

Material.jpeg

Neutronium.jpeg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

04 nozzle.jpeg

<ul><li>.2 layer</li><li>concentric top and bottom layers</li><li>infill as much as you&#39;d like - I do 65% so it feels too light</li></ul>

0.4mm layer,  65% infill, concentric top and bottom layers

Main image.jpeg

<p>I used</p><ul><li> .25 nozzle at .14 layer height</li><li>concentric top and bottom patterns</li><li>65% infill because I like my tokens to feel a bit heavy. - you can do more or less depending on how you like the tokens to feel</li></ul>

0.2mm nozzle, 0.14mm layer, 65% infill

<p>This is my first multicolor model that I created. I wanted something other than the cardboard tokens for Revenant, so I opened up TinkerCAD and made these.  I&#39;m sure someone could make better ones, but these work just fine for me.  I printed them with the smaller nozzle (.25 on the Kobra X) because the lines are kinda thin. I was able to print these with a .4 nozzle at .2 layer. </p>

Revenant Resource Tokens

ASIA

Print Profile(2)

Description

Comment & Rating (0)

License

Related Models