Porche GT3 RS
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 220x180mm in size
You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.66134mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#d1d3d5 PLA BambuLab Basic Light Gray Transmission Distance: 1.7
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Light Gray
At layer #20 (1.68mm) swap to Blue Gray
At layer #23 (1.92mm) swap to Jade White for the rest.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1)