Wiggle in the Dark - Flexi Umbreon Fidget - Free 3D Print Model

Description

Boost Me (for free)

Thank you so much for the Boost! Glad you like it. I hope you can share a picture if you print it! 🚀

Flexi-Umbreon: Your Articulated Dark Evolution Companion! 🌙

Bring the night to life with this fully articulated, print-in-place Umbreon! Designed with incredibly satisfying joints, this little Dark-type evolution wiggles, bends, and poses, making it the absolute perfect fidget toy or desk mascot for any Pokémon fan.

It requires supports only for ears and prints right on the build plate in one piece. It is fully optimized for Bambu Lab AMS, allowing you to easily print the iconic yellow rings and red eyes in full color!

Recommended Print Profile

To get the best results and smoothest joints, please use the following print settings:

Layer Height: 0.16mm or 0.20mm (0.16mm recommended for smoother curves)
Wall Loops: 2-3 (Adds strength to the articulated joints)
Infill: 5% - 20% (Gyroid or Grid)
Supports: ears (Crucial: Do not add supports or the joints will fuse!)
Material: PLA, PETG, or ABS (PLA recommended for best color pop and easy printing)
Print Speed: Standard/Normal. If you experience fused joints, try slowing down the outer wall speed slightly.

Happy printing! If you print one, please upload a make and show off your Umbreon!

Comment & Rating (10)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.