Pokemon - Plusle (Plusle) 17CM Disassembled, no AMS needed

⚡ Pokemon - Plusle (Plusle) 3D Printed Model

It's the energetic "Cheering Pokemon" from the Pokemon series - Plusle (Plusle)! This Electric-type Pokemon, with its light yellow body, red ear tips and tail, and '+' shaped electric pouches on its cheeks, has a model height of approximately 17cm, is full-bodied, and rich in detail. The model has been pre-disassembled for you, allowing for easy multi-color printing without AMS (Automatic Material System). It's perfect for beginners and as a surprise gift for children or Pokemon fans! 🎁

✨ Model Highlights

• No AMS Printing Needed: Designed for standard monochrome printers! The model has been disassembled into parts such as the head, body, limbs, and tail. You can print them separately using different colored filaments like light yellow, red, and white, then assemble them to perfectly recreate the animated series' colorful look.
• Large Size: The finished product is approximately 17cm tall, much larger than typical mystery box figurines. It's very eye-catching on a desk and has a great feel in hand.
• Rich in Detail: It perfectly replicates Plusle's large eyes, iconic '+' tail, and fluffy ears, making it adorably cute.

🛠️ Printing Settings Recommendations

• Filament: Recommended use: PLA (matte PLA gives better results and is easier to sand)
• Layer Height: 0.2mm (balances speed and quality)
• Infill: 15% - 20% (ensures strength)
• Supports: Supports must be enabled (especially for overhangs like ear tips and limbs)
• Print Speed: Standard speed is sufficient

📝 Assembly Tips
Since the model is in disassembled parts, please use model glue for assembly after printing. If layer lines are present, it is recommended to lightly sand and then paint for a more perfect result!