Xbox Series X/S Thumbstick Repair Cap Replacement
Print Profile(1)
Description
🇮🇹 Xbox Series X/S Thumbstick Repair & Cap Replacement
Are your Xbox Series X/S thumbsticks worn out, sticky, or damaged? No need to disassemble the controller! This 3D printable cap is designed to quickly repair and refresh your analog sticks, restoring perfect grip.
Important Installation Note:
- Preparation: For a proper fit, you must completely clean off all the sticky or worn rubber residue from the original analog stick. The stick needs to be stripped down to the bare plastic base before popping this printed cap on.
Key Features:
- Quick Fix: Snaps right onto the cleaned original stick structure.
- Full Compatibility: Once installed, it is fully compatible with aftermarket silicone thumbstick covers/grips made for official controllers.
- Tested Fit: Engineered to maintain full range of motion without hitting the controller shell.
Printing Tips:
- Quality: While it is possible to print using the standard 0.20 mm profile, for a superior aesthetic finish, it is recommended to use a lower layer height or adaptive layers.
- Tolerances: The model is designed for a snug fit. If your print ends up slightly loose due to printer tolerances, simply add a small drop of glue inside the cap to secure it permanently.
🇬🇧 English Description
Are your Xbox Series X/S thumbsticks worn out, sticky, or damaged? No need to disassemble the controller! This 3D printable cap is designed to quickly repair and refresh your analog sticks, restoring perfect grip.
Important Installation Note:
- Preparation: For a proper fit, you must completely clean off all the sticky or worn rubber residue from the original analog stick. The stick needs to be stripped down to the bare plastic base before popping this printed cap on.
Key Features:
- Quick Fix: Snaps right onto the cleaned original stick structure.
- Full Compatibility: Once installed, it is fully compatible with aftermarket silicone thumbstick covers/grips made for official controllers.
- Tested Fit: Engineered to maintain full range of motion without hitting the controller shell.
Printing Tips:
- Quality: While it is possible to print using the standard 0.20 mm profile, for a superior aesthetic finish, it is recommended to use a lower layer height or adaptive layers.
- Tolerances: The model is designed for a snug fit. If your print ends up slightly loose due to printer tolerances, simply add a small drop of glue inside the cap to secure it permanently.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)