Print Profile(1)
Description
Wall mount for a Fritzbox
Universally fitting
Printed for a 4690, but should also fit all other models, with a housing diameter at the thickest curve up to 55mm
(measure - if your box has a different diameter, just let me know!)
The holder consists of 2 parts:
The wall mount for screwing / gluing
The Fritzbox holder for plugging on (print 2x)
The wall mount can be screwed to the wall with 2 M4 screws, the slotted holes are generously sized, so the distance is largely variable (for me, the holes in the wall never align despite precise marking, which is why I love it when I have some tolerance during assembly)
Alternatively, attach with mounting adhesive - there are 1mm grooves on the back that enhance adhesive strength through more surface area.
Observe drying time when gluing.
I prefer gluing now.
Align the wall mount with a spirit level (if you like it angled, you can of course mount it that way)
Hold the Fritzbox in place, attach the holders left and right, and slide them onto the wall mount from the side.
Fits and holds - proof see photo.
I recommend printing with PETG!
Coincidentally, I had red filament (PETG Basic), which matched the box perfectly.
The holder has some distance from the box to ensure good ventilation and allow cables to be routed behind the box.
3 wall lines + 25% honeycomb infill provides sufficient stability.
Otherwise, there's not much to consider during printing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)