Monkey D. Luffy post-timeskip (Multipart, No AMS)

Monkey D. Luffy post-timeskip - One Piece - (Multipart, No AMS)

Kaizoku-ō ni ore wa naru! Bring the infectious energy of the future King of the Pirates straight to your shelf!

This highly detailed figure captures Monkey D. Luffy in his iconic post-timeskip design, featuring his signature red cardigan, yellow waist sash, blue shorts, and the legendary X-shaped chest scar.

Captured in a joyful, dynamic jumping pose that perfectly reflects his carefree and adventurous spirit.

Fully printable without an AMS, thanks to color-based segmentation. Even the face!

The figure measures 21,6 cm in height when fully assembled with base.

Check out my Luffy Gear 5 - One Piece - (Multipart, No AMS)!

Check out my other Multipart Models!:
Earthworm Jim

Cute Halloween VOL1:

Cute Halloween VOL2:

Cute Cows

Please read before printing:

This model features fine details and delicate structures.
Make sure your print bed is clean and free from dust, grease, or residue to ensure strong adhesion.
Place your printer on a stable, vibration-free surface, and confirm that vibration compensation is correctly calibrated.
Before printing, double-check that your filament profile matches the material and that your bed temperature is properly set.
For more tips on this topic, check out this video on YouTube. video (Youtube).

Print Recommendation:

I recommend printing this Models with the orignal intendet Print Profil: [original] variable layers, optimised settings.
This includes a layer height of 0.16 mm and some parts (head, eyes, etc.) with variable layer height to 0.08 mm and hidden seams. The variable layer height and hidden seams is already set in the 3MF file.

Prints with different layer heights are sorted onto different printing plates, despite sharing the same color.

Support Structures:

Be careful when removing the support structures to avoid breaking.

Additional supports have been added to minimalize the risk of print errors.

Brim is enabled in some parts for increased print stability.

The Design and my Print Profil is designed with minimal but necessary supports.

Assemble:

Included is a highly detailed, step-by-step assembly manual to download. 

For assembly, I recommend using PLA glue or plastic glue, preferably a fast-drying one.
I personally use German super glue. It dries within a few seconds and creates a very strong bond.

The GIF mentioned in the instructions for attaching the face parts:

Check out my other Models!

Have fun printing!