Trench Crusade Desecrated Saint 60mm Base
Print Profile(1)
Bill of Materials
Description
60mm Base with 4-Magnet System – Trench Crusade Compatible
A 60mm base designed for use with Trench Crusade, fitted with four 5×2mm magnet slots arranged for maximum holding strength.
Designed for those who weren't satisfied with the single magnet typically included with bases of this size. For a heavy resin model like the Desecrated Saint, one magnet simply isn't sufficient — especially when transporting models in a box with magnetic sheets. Four magnets give a much more secure hold and keep the model firmly in place during transit.
Details:
- 60mm diameter (measured at the base footprint)
- 4× 5×2mm magnet recesses
- Designed for Trench Crusade base size requirements
Note:
The magnet fit is tight by design. A small tool or other flat object may be needed to press the magnets fully into their recesses.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)