ilRox.3D

cover

1000123213.jpg

1000123209.jpg

1000123210.jpg

1000123211.jpg

1000123212.jpg

plate_1.png

plate_2.png

6fd47b31350f24c7.png

Compatible with X1, P1S, P2S + AMS&nbsp;Dettagli di stampa:&nbsp;A 0.12 mm print profile ensures fast and precise results.Duration approximately 2.20hr.2 Walls, 10% infill, total weight approximately 24gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts could need gluing.

PROFILO X1/P1 SERIES +AMS - 0,12mm layer, 2walls, 10% infill

6fd47b31350f24c7.webp

COMPATIBILE CON X2D + AMS Dettagli di stampa:A 0.12 mm print profile ensures fast and precise results.Duration approximately 2hr.2 Walls, 10% infill, total weight approximately 23gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts may need gluing.

PROFILO X2D + AMS - 0.12mm layer, 2 walls, 10% infill

COMPATIBILE CON A1 / A2L + AMS Lite&nbsp;Dettagli di stampa:A 0.12 mm print profile ensures fast and precise results.Duration approximately 2.20hr.2 Walls, 15% infill, total weight approximately 24gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts need gluing.

A1/A2L + AMSLite Profile - 0.12mm layer, 2 walls, 15% infill

COMPATIBLE WITH P2S + AMS  Dettagli di stampa:&nbsp;A 0.12 mm print profile ensures fast and precise results.Duration approximately 2.20hr.2 Walls, 10% infill, total weight approximately 24gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts need gluing.

PROFILO P2S + AMS - 0.12mm layer, 2 walls, 10% infill

COMPATIBILE CON H2S + AMS Dettagli di stampa:A 0.12 mm print profile ensures fast and precise results.Duration approximately 2hr.2 Walls, 10% infill, total weight approximately 23gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts may need gluing.

PROFILO H2S + AMS - 0.12mm layer, 2 walls, 15% infill

COMPATIBILE CON H2D e H2C + AMS Dettagli di stampa:A 0.12 mm print profile ensures fast and precise results.Duration approximately 2hr.2 Walls, 15% infill, total weight approximately 23gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts may need gluing.

PROFILO H2D/H2C + AMS - 0.12mm layer, 2 walls, 15% infill

plate_3.png

plate_4.png

plate_5.png

COMPATIBILE CON A1 MINI + AMS Lite Dettagli di stampa:&nbsp;A 0.12 mm print profile ensures fast and precise results.Duration approximately 2.20hr.2 Walls, 10% infill, total weight approximately 24gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts may need gluing.&nbsp;

PROFILO A1 MINI + AMS - layer 0,12 mm, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Ultimamente sono stati avvistati degli strani membri dell&#39;equipaggio, dotati di tute speciali… sembrano come provenire da altri Universi…<figure class="image image_resized" style="width: 37.84%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002930770/design/e2d46d7ef2b0a4d3.png"></figure>Lui non ha paura di nessuno…i cattivi invece tremano al solo sentire il suo nome……il cavaliere oscuro è entrato nella crew!!!  Suddiviso in quattro colori, con parti che si incastrano perfettamente (alcune parti necessitano di un po&#39; di colla per rimanere al loro posto). Progettato per una stampa facile e veloce, il modello è ottimizzato per tutte le stampanti 3D Bambu Lab. I pezzi sono sagomati per un assemblaggio intuitivo e rapido, rendendoli ideali anche per i bambini.&nbsp;!!IMPORTANTE!!!Non hai tutti colori necessari per stampare questo modello? …ne sei sicuro? prova a dare un occhiata a questo progetto, grazie al quale potrai realizzare dei nuovi colori a partire da quelli in tuo possesso! ti basterà verificare quanto filamento ti serve in termini di grammi per stampare una determinata parte e poi procedere a realizzare il nuovo colore nella quantità necessaria, sul serio questa idea (che non è mia) è geniale, grazie <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@jetpad">jetpad</a> ! <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/460079-multi-color-filament-mixer#profileId-368497">https://makerworld.com/en/models/460079-multi-color-filament-mixer#profileId-368497</a>&nbsp;&nbsp;Il design include:<ul style="list-style-type: disc"><li>Parte superiore: il corpo principale del personaggio, incluso casco e visiera.</li><li>Parte inferiore: le gambe del personaggio, la parte interna sanguinolenta, entrambe progettate per incastrarsi saldamente nel corpo superiore.</li><li>Struttura interna: si adatta perfettamente alla parte interna, aggiungendo un dettaglio divertente e riconoscibile.</li><li>Dettagli unici: che fanno subito intuire da quale universo arriva!</li></ul>Questo modello è anche ideale come decorazione da scrivania, aggiungendo un tocco giocoso accanto al tuo PC o postazione di lavoro. Le sue dimensioni compatte lo rendono adatto a qualsiasi spazio… stampali tutti!&nbsp;Buona Stampa!!&nbsp;&nbsp;

Lately, strange crew members have been sighted, equipped with special suits... they seem to come from other Universes...<figure class="image image_resized" style="width: 37.84%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002930770/design/e2d46d7ef2b0a4d3.png"></figure>He fears no one... villains tremble just hearing his name......the dark knight has joined the crew!!! Divided into four colors, with perfectly interlocking parts (some parts may require a bit of glue to stay in place). Designed for quick and easy printing, the model is optimized for all Bambu Lab 3D printers. The pieces are shaped for intuitive and rapid assembly, making them ideal even for children. !!IMPORTANT!!!Don't have all the colors needed to print this model? ...are you sure? Take a look at this project, thanks to which you can create new colors from those you already own! You just need to check how much filament you need in grams to print a certain part and then proceed to make the new color in the necessary quantity, seriously this idea (which is not mine) is brilliant, thanks <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@jetpad">jetpad</a> ! <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/460079-multi-color-filament-mixer#profileId-368497">https://makerworld.com/en/models/460079-multi-color-filament-mixer#profileId-368497</a> The design includes:<ul style="list-style-type: disc"><li>Upper part: the main body of the character, including helmet and visor.</li><li>Lower part: the character's legs, the bloody internal part, both designed to fit snugly into the upper body.</li><li>Internal structure: fits perfectly into the internal part, adding a fun and recognizable detail.</li><li>Unique details: that immediately suggest its universe of origin!</li></ul>This model is also ideal as a desk decoration, adding a playful touch next to your PC or workstation. Its compact size makes it suitable for any space... print them all! Happy Printing!!

Print Profile(7)

Description

Comment & Rating (1)

License

Related Models

AMONG US GUY x BATMAN dall'universo DC

Print Profile(7)

Description

Comment & Rating (1)

License

Related Models