Cute Smiling Little Monster

Hello everyone! I'm sharing this cute and chubby little monster with big ears and a contagious smile. It's a perfect model to keep on your desk, as a visual stress reliever, or as a fun little gift.

This 3D model was originally generated using Meshy AI and then optimized to ensure excellent results with FDM 3D printing.

💡 The extra touch: Fuzzy Skin As you can see from the photos, the best result for this character is obtained by activating the 'Fuzzy Skin' function on the outer walls through your slicer (like Bambu Studio). This setting not only gives it a fantastic plush-like aesthetic effect but also perfectly hides the classic layer lines, making the surface homogeneous and pleasant to the touch.

⚙️ Recommended print settings:

• Material: PLA or PETG (in the photos it's printed in blue PLA)
• Layer Height: 0.16mm or 0.20mm for a good compromise between speed and quality.
• Infill: 10-15% (standard infills like Gyroid or Grid are sufficient).
• Supports: Recommended. Light tree supports might be needed under the belly and ears, depending on the size you decide to print it at.
• Fuzzy Skin: Highly recommended for outer walls (Contour).

I hope you enjoy printing it as much as I did. Happy printing!