Water-cooled brushless outboard motor

Welcome to my Taobao shop to purchase a complete set of accessories: “Laobiao Model Design Sharing” Thank you for your support!

This is a water-cooled brushless outboard motor that integrates speed, flexibility, control, and stability, this type of outboard motor is commonly known as a “big flyer” engine. The boat models I have made before are generally referred to as “inboard motors.” The advantage of outboard motors is their flexibility; although they may not be as fast as inboard motors, they are very convenient to inspect and disassemble. The assembly process is very simple, and you only need very few materials to assemble this boat.This inboard motor can be a complete unit on its own, so you can place it on any boat model you want to try.However, one thing to note is that due to the size of this engine, it is currently only suitable for hulls around 40-70CM in length.You just need to download the files and print them out, then assemble them according to the assembly guide below, and you can enjoy playing with it.,It should be noted that the engine speed of this boat is very high, so many bearings will be used in the assembly process, and the printed parts also require very high strength. It is recommended to print with PETG material, as PLA can degrade and may cause the shell to soften and lose strength over time. Also, please pay attention to safety when playing; do not play in choppy waters or unknown waters. You can choose a calm body of water and invite good friends for a boat model race! It is truly a lot of fun. Of course, if you think it's good, don't forget to send me a boost coupon so more friends who love 3D printing and remote control models can see it!And I have also put the required materials in the assembly guide below. Those who need them, remember to check before assembly!