The Breach Keeper–LED Lighting & Incens Fog Effect

This is my first project involving LEDs and incense. I wanted to create an atmospheric effect using light and smoke, and I think it turned out quite well.

I included space for two AAA batteries, although you can also power the LEDs with a USB charger. A rear cover with an opening for a USB cable is included as well.

One important thing to keep in mind is to place something heat-resistant underneath the incense. This creates some distance between the incense and the PLA, since the heat from the incense can melt the PLA if they are too close to each other.

For the Giant Lich Keeper, I had to use the Arachne wall generator, as some parts did not print properly with the Classic wall generator. I also used supports with the "build plate only" setting.

As for the ruins, I painted supports for the upper battery opening and allowed those supports to be generated on the model instead of restricting them to the build plate.

I'm glad I didn't encounter any major issues while printing everything on my A1 Mini. My main concern was that the tall supports might bend due to the high-speed movement of the bed, but fortunately everything printed very well.

I hope you enjoy this model and find it useful for your storytelling games.

Happy printing, everyone!