Print-and-Fish One-Piece Crankbait for Pike Bass

Print-and-Fish One-Piece Crankbait

Unlike traditional 3D-printed lures that require printing two separate halves and gluing them together around internal weights, this crankbait prints entirely in one single piece.

Why you'll love it:

• Super Fast Post-Processing: Just print it, screw in your hook eyes/hooks, and you are ready to hit the water!
• Optimized Design: Engineered to print cleanly and swim with an irresistible action right off the build plate.

Recommended Print Settings:

• ⚠️ IMPORTANT: Print Slow for Water Resistance! To ensure the lure is completely waterproof, achieves maximum layer adhesion, and has top-tier durability against big fish, you must print slowly. I highly recommend limiting your maximum volumetric flow rate to 8 mm³/s in your slicer settings.
• Infill: 100%
• Walls: 3
• Material: PLA or PETG work great, Bambulab PLA Silk+ is great too (PLA Silk from other brands are brittle and don't work), unfortunatly Bambulab PLA Silk Multi color is to bittle for this bait.
• 🔧 Tight Fit & Calibration (Crucial for the Diving Lip): For the lip to fit perfectly into the body, your printer needs to be well-calibrated. I printed this on my Bambu Lab X1C. To achieve the perfect tight fit with my PETG Crear filament, I adjusted the Z-scale (height) of the diving lip to 96% in the slicer. Depending on your filament and shrinkage, you might need to slightly tweak the Z-height of the lip component yourself to get that flawless, secure snap-fit!

The links below are affiliate links (no extra cost to you). If you decide to buy through them, I’d be very happy as it supports my work. Thank you!

Treble Hooks High Carbon Steel Size 2 gap 9.5

Split Rings Stainless Steel 6mm

Fish eyes

Stainless Steel eye hook

Split Ring Pliers

Super Glue Gel Waterproof