Reinforced 3-Tier Minimalist Display Stand
Print Profile(1)
Bill of Materials
Description
Minimalist 3-Tier Display Stand (175x170x140 mm)
This 3-tier stand is the ultimate solution for professionally displaying your gadgets, miniatures, or small design objects. Designed entirely by me, the model aims for maximum aesthetic cleanliness and structural robustness.
Key Features:
- Optimized design for A1 mini: It utilizes almost the entire print bed (180x180 mm), ensuring the maximum possible display surface.
- Support-Free Printing: Designed with angles and tolerances that allow for smooth printing without filament waste.
- Precise measurements: Width 175 mm, Depth 170 mm, Height 140 mm.
- Premium Effect: Ideal if printed with Black PLA or matte filaments (Matte) to reduce reflections and highlight displayed objects.
ATTENTION: The Top Shelf is the only one to have both edges (front and back) rounded for a perfect aesthetic finish, it should be inserted at the top.
Assembly Instructions: Assembly is extremely simple and does not require the use of glue:
- Take the two side supports.
- Fit the three shelves into the appropriate slots using the integrated pins.
- Thanks to the calibrated tolerances (0.20 mm), the pieces will lock firmly in place with slight pressure (press-fit).
Recommended print settings:
- 2 Walls (Walls)
- 15% Infill (Infill)
- Layer Height: 0.12 mm or 0.20 mm depending on desired finish
Boost Me (for free)
I would love to see photos of your prints! If you like the model, post a 'Make' and, if you wish, support my work with a Boost.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)