Spider Noir Figure | NO AMS

🕸️ Spider-Man Noir Chibi Figure 🕸️

“With no power comes no responsability”  -Ben Reilly

Bring the gritty, 1930s alternate-universe webslinger to your desk with this awesome Spider-Man Noir chibi figure! Standing at a default height of 10 cm, this model is optimized for easy printing and looks fantastic in standard PLA.

📥 Print Profiles Available

To give you the best printing experience, I have prepared two distinct profiles depending on your setup:

🟢 Profile 1: No AMS (Time & Filament Saver)

• Best for: Single-extruder / Non-AMS printers.
• How it works: The eyes are separated from the main body. You can print the body in black and the eyes in white separately.
• Advantage: Saves a massive amount of printing time and eliminates filament waste from purging.
• Assembly: A small drop of superglue (CA glue) is required to attach the eyes to the mask after printing.

🎨 Profile 2: AMS Ready (Pre-Colored)

• Best for: Bambu Lab AMS users.
• How it works: The model comes fully pre-painted and ready to print in multi-color right out of the box.
• Advantage: No gluing or assembly required, offering a seamless and premium look straight off the build plate.

⚙️ Print Settings & Recommendations

• Material: PLA (Works great with matte or standard black and white PLA).
• Default Height: 10 cm (Can be scaled up, but scaling down drastically might affect thin details).
• Supports: REQUIRED. Due to the trench coat and hat brim, supports are necessary. Not complex to remove.
• Post-Processing Note: I highly recommend using a dedicated support removal tool or pliers to clean off the supports carefully to avoid damaging the coat edges.

For my other figure models -→  https://makerworld.com/en/collections/14956173-figures 

#SpiderMan #SpiderNoir #SpiderVerse #Marvel #Chibi #ActionFigure #BambuLab #AMSReady #NoAMS #3DPrinting #Toy #Miniature