HERO IRON ARTIGLI

🎨 Paint Your Herome Challenge is live!

Join our May painting contest: print and paint one of my models, share your finished work, and you could win a €40 voucher.

To participate, enter our Discord server and look for the contest section:

paint-your-herome-challenge

👉 Click on the image to join the contest!

Grab your brushes… the painting war has begun. 🔥

Armored sci-fi miniature for table display, original fan-made armored soldier design, printable decorative model with scenic base

Or, if you want to lend a hand, you can boost the server and support the community.

AND ALSO CHECK OUT THE INSTAGRAM PROFILE

PRINT PARAMETERS USED FOR TESTS

Test scale: approximately 5 cm

PLA Basic white  
Layer height: 0.16 extra fine  
Supports: hybrid tree  
Outer brim: 10 mm  
Object spacing: 0 mm

If you want to give a small buff to this nerd project, you can do so with a PayPal contribution here.

SUPPORT REMOVAL

The supports are designed to be quite delicate.

They remove without damaging the model but calmly:
one at a time, slowly, using tweezers and a bit of patience.

No need to go Rambo on the supports…  
otherwise something breaks and you end up crying in front of the printer.

------------------------------------------------

TECHNICAL NOTES (the truth, not poetry)

I prefer to print figures in single color and paint them after priming using acrylic markers or miniature painting techniques.

The colored images on the cover are only examples of coloring generated with AI to show possible painting styles.

The final result always depends on the personal taste of the person painting the model, I apologize for some imperfections and slight differences between the real model and the AI model, I still need to perfect the method!!!!in all cases you have my photos both with and without supports as a reference printed model!!!

The design originates from an AI generation (Tripo), subsequently manually refined and tested in FDM printing to ensure real printability.

The real print photos are the single-color white or gray ones present in the gallery.

------------------------------------------------

THE PART THAT DECIDES IF YOU PRINT OR CURSE

Bed adhesion.

I use CryoGrip Pro Frostbite and the adhesion is so strong that prints seem to have taken out a mortgage on the bed: they never detach.

I mainly use Bambu filaments and have no problems.

If you use a different setup:

• focus first and foremost on bed adhesion  
• use dry and quality filament  
• keep the bed perfectly clean  
• do not be afraid to use extra brim or supports

With these precautions, printing becomes much simpler and more reliable.

------------------------------------------------

THE HEROME COLLECTION

If you like this model you can find all the other figures in the collection here:

https://makerworld.com/it/@Gara/upload

Be careful though…

if you start printing them, you'll end up wanting them all.

If you like the model, leave a like, it really helps the project grow.

If you want to give a small buff to this nerd project, you can do so with a PayPal contribution here.

instagram: https://www.instagram.com/herome.original/ 
discord: https://discord.gg/9PxaVVxMXA