paw patrol paw patroller truck

Here I created the Paw Patroller because you only get it for small cars, so I made it bigger

All parts can be printed without AMS

I have uploaded 3 files:

1x Truck

2x Trailer

3x Signs

Today 06/14/2026 I added two more files:

1x Tailgate

1x Roof for Air Patroller

Simply swap the files and print, they fit perfectly with the others

For the tires you need 12x M5 x 20mm countersunk head screws

Everything is designed to be simply plugged together, and I recommend securing it with glue

I printed everything with a 0.4 nozzle

I created tires once for TPU and once only in PLA. TPU is naturally quieter, but both work without problems

Feel free to message me with any questions, some might come up if I haven't described something properly. I only do this as a hobby and most things are for my child to have fun, but of course I also want other children to have fun with it, which is why I'm putting the files online

So now let's start with the truck.

Everything is actually self-explanatory, but you have to pay attention to the windows

I would put the roof on first. Then the tires. Then everything else around and then the windows

First, glue the large one on the side, flush with the front

Then the front one. With this one, it's important to glue it at the top first and wait until it's set. I used super glue and it worked great

Once it's firm at the top, apply glue at the bottom and bend the window, waiting for it to dry, so it sits perfectly

Once it's firm, glue the two small ones on the side

Glue the two together

Once they are glued, you can slide it in on the right and insert the pin on the left

Afterward, I glued two thin magnets so it stays closed

Trailer:

I would first glue the lower part

Then it's important to attach the tires first. Because if the blue parts are glued before, it won't work with the tires anymore

After that, I would glue the lid

Once it's glued, you can glue it onto the trailer

Then the side panel for sliding

The red and white parts can be glued directly

The lower blue part only when it's slid in

Then it's pretty much finished. Just glue the numbers and emblems as you like

I also downloaded some for the front and the side, links are here:

Scaled to 35% for the sides

https://makerworld.com/en/models/906854-paw-patrol-shield#profileId-3140995

For the radiator

https://makerworld.com/en/models/1090195-paw-patrol-badge#profileId-1083528

Feel free to give both a like and a boost. Also, feel free to share a finished picture with the truck. Thank you

So then I hope I have written everything correctly so that everything works, otherwise feel free to ask questions