Turntable VTA Spacer & Inserts for AT-VM95

🎵 Turntable VTA Spacer & Alignment Inserts for Audio-Technica AT-VM95 🎶

This is a spacer kit to achieve the perfect Vertical Tracking Angle (VTA) and seamless cartridge alignment on your turntable.

1. Main VTA Spacer (1mm)

My turntable was factory-calibrated for a stock cartridge that was roughly 1mm taller than the Audio-Technica AT-VM95 series. Installing this 1mm spacer between the cartridge and the headshell perfectly compensates for the height difference. It brings the tonearm back into a completely parallel plane with the vinyl record. My cartridge (AT-VM95ML) now tracks flawlessly and sounds absolutely wonderful.

• Note: You can easily scale the Z-axis in your slicer to match your specific height requirements.

2. Precision Alignment Inserts (Headshell Grooves)

The kit also includes two small  spacers designed to fit directly into the mounting grooves of the my headshell. Most of these grooves in cooon headshells are the same size, only the holes may be different distance for everyone.

• No more alignment guesswork: These inserts precisely lock the cartridge's overhang position.
• They are designed so that the mounting screws align exactly with the my turntable (TEAC TN-4D-SE) manufacturer's specified geometry. Once inserted, the cartridge is perfectly squared and positioned without any tedious manual measuring.