Search models, users, collections, and posts
M5Stack Paper Color e-paper Display Stand
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 25% infill
Designer
2.3 h
2 plates
0.08mm layer, 2 walls, 15% infill, PLA/PETG Supt. Interface
Designer
2.9 h
1 plate
Open in Bambu Studio
Boost
1
3
0
0
4
5
Released
Description
M5Stack Paper Color e-paper Display (SKU: C151) Stand, with integrated USB C cable management. A portrait version stand is also available.
Designed to integrate with the display's built-in clip indentations. The display is angled for easy viewing.
* Print with support *
Two Print Profiles are included:
- If you have access to Support for PLA/PETG, I would recommend using this print profile for optimal strength and surface finish.
- If you don't have access to Support for PLA/PETG, use the alternative Print Profile and print “bottom down” or on its side. Printing on its side will give good clip strength, printing on its base works well… but don't over flex/stress the clip while mounting / unmounting the display, to avoid breaking at a layer line.
Prints well in PLA, although PETG likely a more robust choice for long-term use.
If planning to power via USB, rather than built-in rechargeable battery, I would suggest using a low profile style Flat 90-Degree / Right Angle USBC to USBC cable (example) to help the connection blend in. The built-in cable management fits a typical ~3mm cable diameter - See pictures.
Printed with a 0.4mm nozzle and 0.2mm layer height.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)