Musical Fidget Passive Sound Booster & Amp

📢 Boost your Musical Fidget volume with this Passive Sound Booster! 🔊✨
This is a specially designed acoustic amplifier box engineered specifically to maximize and enrich the crispy click sounds of **kida's amazing Musical Fidgets**! Inspired by battery-free wooden smartphone speakers, it naturally channels and amplifies the resonance through an internal hollow structure and dual side ports.

🤝 **Big Respect to the Creator:**
This device is built to be the ultimate companion for the Musical Fidgets generated by the genius creator **kida**!
Check out kida's MakerWorld profile here:
👉 https://makerworld.com/ja/@kida

💡 **Crucial Usage Tip for Maximum Volume:**
Do NOT place the fidget directly in the center of the box, as the sound may become muffled. For the loudest and crispest sound, place the fidget closer to the **FRONT or BACK CORNER** (as shown in the photo) before tapping!

🛠️ **Print Settings & Material Recommendations:**
- **Layer Height:** Printed at 0.16mm for high precision, but 0.2mm or 0.24mm works perfectly fine too.
- **Main Body Enclosure:** Rigid materials like Bambu PLA Sparkle or premium PLA+ are highly recommended to achieve the best metallic resonance.
- **🔥 SECRET SOUND TECHNIQUE:** Print the front (with the text) and back plates using a softer/flexible PLA or TPU! This allows the panels to vibrate like a real speaker membrane, drastically amplifying the output.
- *My Exact Setup:* Main body (PLA+ / Bambu PLA Sparkle), top lid and bottom plate (Silk Filament).

📺 If you want to see exactly how to position the fidget or hear the massive sound difference, check out my YouTube channel for a full video guide!

---
📢 Boost the volume of your Musical Fidgets dramatically with this "Power-Free Sound Booster"! 🔊✨
This device is an acoustic amplification box specifically designed to maximize and enrich the pleasant clicking sounds of the wonderful "Musical Fidgets" developed by the genius creator **kida**!

🤝 **Respect to the developer kida:**
This booster is the best companion for enjoying kida's Musical Fidgets to the fullest. You can find kida's amazing creation page here:
👉 https://makerworld.com/ja/@kida

💡 **Tip for producing the loudest sound:**
If you place it in the center of the inner box, the sound will conversely become muffled. As shown in the photo, by placing it closer to the front or back "corner" and tapping, the internal hollow structure will resonate perfectly, producing the most powerful and beautiful sound!

🛠️ **Printing notes & recommended materials:**
- **Layer Height:** I printed it at 0.16mm for a precise finish, but 0.2mm or 0.24mm works perfectly fine as well.
- **Material:** For the main outer box parts, using a harder material (such as Bambu's genuine PLA Sparkle or third-party PLA+) will produce a sharp, resonant sound.
- **🔥 Secret trick for even louder sound:** If you print the front plate with text and the back plate using a "soft material (like soft PLA)", they will function like a real speaker's diaphragm (cone), dramatically increasing the volume!
- *My setup:* The center box uses PLA+/Bambu genuine PLA Sparkle, and the lid and bottom parts (at the back of the photo) use silk filament.

🎵 If you want to see how to actually play it or the best position to place the fidget, please check out my YouTube video for a clear demonstration and explanation!