Lagoa da Pampulha - BH/MG

Bring the beauty of urban planning and geography into your decor with this 3D Map of the Pampulha Lagoon Region!

This model was carefully designed to make the most of multi-material printing (like the Bambu Lab AMS/AMS lite system). It features impressive relief that highlights the water, parks, streets, and city blocks, creating a tactile and visually striking art piece. Perfect for displaying on office desks, bookshelves, or even framing as a wall art.

✨ Model Highlights:

• AMS Optimized Design: Heights and divisions were designed to minimize unnecessary filament changes, maintaining perfect sharpness between streets (black), water (blue), nature (green), and buildings (gray/white).
• Zero Supports: A completely "Print in Place" model. Just slice and print.
• Flat Surface: Ideal for direct printing on the textured PEI plate, ensuring a solid base and professional finish.

⚙️ Recommended Print Settings:

• Layer Height: 0.16mm (Recommended for better capture of building and street details) or 0.20mm for faster printing.
• Infill: 10% to 15% (Gyroid). As it is a predominantly flat piece, not much infill is needed.
• Supports: No.
• Brim: Recommended only if you experience warping at the edges, due to the size of the base.
• Suggested Colors (4 colors):
  • 🔵 Blue (Lakes/Seas)
  • 🟢 Green (Parks/Forests)
  • ⚪ Gray or White (Urban Areas/Buildings)
  • ⚫ Black (Streets/Main roads)

💡 Maker's Tip: Since the model occupies a large area of the print bed, make sure to thoroughly wash your plate (Build Plate) with warm water and neutral detergent before starting, to ensure perfect first layer adhesion across the entire map!