1:12 Bambulab A2L printer

Bambu Lab A2L 3D Printer – 1:12 Scale

⚠️ IMPORTANT: This model is designed specifically for a 0.2 mm nozzle. Printing with a larger nozzle may result in loss of detail or failed prints of the smallest components.

This highly detailed 1:12 scale model of the Bambu Lab A2L 3D printer is designed for dioramas, workshops, maker spaces, and miniature displays.

Many parts are extremely small, and assembly can be challenging. A pair of tweezers is highly recommended, as some components are difficult to handle by hand.

Moving Print Bed Assembly

The print bed is designed to be movable.

1. Insert the part named "slider" into the printer body from the bottom.
2. Close the assembly using the "bottom" part.
3. Once the slider is captured inside the body and can move freely, glue the bed onto the exposed section of the slider.

⚠️ Do not glue the slider to the printer body.
Only glue the bed to the slider. The slider must remain free to move inside the printer.

Before You Start

This model will test your patience. Some components are exceptionally small, and assembly requires a steady hand and careful attention to detail.

However, if you take your time, you will be rewarded with a highly detailed miniature printer that makes a perfect addition to any workshop, garage, maker space, or diorama scene.

Enjoy building it!

Enjoyed this model?
Please consider leaving a like, rating, or sharing a photo of your print — I love seeing your results!
Your support and every single boost help me continue designing and improving new models.
Thank you! 🙌