Bonk Atomic Punch Cherry Fission
Print Profile(2)
Bill of Materials
Description
It's a AMS heavy one this time guys, and not the last either ;)
It is the most straightforward print wise and assembly.
You will need 6 colours. OR 4 colours with a colour mix option. (Example is printed on a Snapmaker U1 with Fullspectrum. Bambu has this feature too, be sure to test out the colour mix on a small test object like a cube or cone.)
The Other flavours and variants are on the way! Along other Bonk merch :)
(Please be patient, these take very long to print, and getting the colour mix for them correct takes a while too.)
Arachne Wall generator is MANDATORY! Or else the fine lettering wont work!
It is suggested to print at .16mm layerheight or lower for better detail, if possible a .2mm nozzle is ideal (keep in mind when using AMS on a .2mm nozzle that it is more prone to clogging.)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)