Pepe's Vacation Home

This model is based on the offhand weapon in World of Warcraft called 'Pepe's Vacation Home' to fit your pepe plush. Mine is hand painted because my AMS is broken, but I included an AMS version of the print in case you want to go that route. If you want to hand paint it, all you need to do is delete the painted on color changes. 

Assembly: 

1. Insert the diamond shaped black piece into the top of the house. I made the tolerances tight, but would still glue these in to make sure it is secure. If you are struggling to get the piece in, gently tap it with a hammer and it should fit in. 
2. thread the small ring through the half ring, then insert the half ring into the holes on the diamond shaped piece. I recommending glueing this in.
3. When you're attaching the large ring, gently pull the gap apart and slip the small ring through it (see last pics). After that, you can glue the large ring shut, or just leave it as is if you plan on hanging it on a large branch. If you are going to hang it on a hook, I would glue the ring shut. 

When you're inserting your plush, tuck in the tail and tag, before gently squeezing him in through the large front hole. I have left the windows open so it is easy to adjust him in the house, and remove him. I'll be releasing a later model with window inserts. 

If you have a larger plush (like the venthyr shadowlands plush), this house might be a tight fit. You'll likely need to adjust ALL the pieces larger. the slime, bastion,  ardenweld, traveler, and ninja should fit as is.